Part 6: Base and quick trial

I took a crack at this on a Saturday thinking I would make huge progress and finish it and so on.

Well it did not quite go like that. I took few photos that day - so cannot log the exact stages.

I basically joined the two panels together at the base using a 25" wide panel. I really tried hard to make sure it was square - but when I look back I have a feeling that the floor was not quite flat (with a spirit level).
Either that or the side panels were slightly bent. Anyway - I did the best I could...

Here is Solomon trying this out. I temporarily slapped an old laptop under there with a monitor.
I had to fit the monitor to make sure it was square. Thankfully it was.

As you can see I fitted the major support panels. It is starting to take shape...